Tascam GVI - Manual (Page 20)

FILTER LFO SECTION
20
he
Frequency: The Filter LFO frequency value can be set
between 0.1 and 10 Hz and controls the rate at which t
LFO oscillates.
Control Source: The Control Source selects between
Internal LFO, Mod Wheel, Foot Control, or a
combination of either Internal LFO and Mod Wheel or Internal LFO and Foot Control.
Invert: When enabled, this setting reverses the incoming MIDI controller data values.
Synch: This option provides a single, synchronized LFO rate across all regions. When Synch is
enabled, the LFO will be constant no matter what note is played or when it is struck. When
Synch is disabled, the LFO begins at the point in time when each individual note is struck and
will have its own “out of synch” and independent cycle.
When Synch is enabled, the LFO cycle
will stay in synch for all the notes no matter when they are triggered.
Internal Depth: This parameter applies a fixed LFO depth that is always present when
“Internal” is selected as one of the Control sources.
External Depth: An external MIDI continuous controller can also be used to control LFO
Depth. This setting works the same way as the Internal depth settings but you won’t hear its
effect until the assigned MIDI controller is engaged.