TAG MIL-BOOK 20 Series - Manual (Page 108)

6-8 Installing Software Drivers
Touch screen Calibration:
1. After the system has finished rebooting, click on the “Penmount
monitor” icon located on the taskbar to bring up the “Penmount
Control Panel”.
2. Select the “Standard Calibration” folder and click on “OK”.
3. If you need 4,9,16,25 dot of the calibrate, we suggest select
“Advanced Calibration” button to calibrate.
4. Click on the four sides (points) and the plus-sign “+” on the screen
to calibrate your touch screen pen for use on the computer.
Note:
1. You may encounter this problem from some touch screens with cursors shift issue
when you work high temperature or high humidity environment.
2. The touch screen under calibration doesn’t support by VGA extension mode.