Targus 4-Port USB 3.0 Hub 410-2217-001A User Manual

Page 2

Advertising
background image

Targus 4-Port USB 3.0 Hub

2

Targus 4-Port USB 3.0 Hub

3

Introduction

Thank you for your purchase of the Targus 4-Port USB 3.0 Hub. This hub

allows you to connect up to 4 USB 3.0 devices such as hard drives, flash

drives, printers and more.

System Requirements

Hardware

• USB interface
Operating System

• Microsoft Windows

®

7

• Microsoft Windows

®

XP

• Microsoft Windows Vista

®

• Mac OS

®

X 10.4 or later

Contents

• Targus 4-Port USB 3.0 Hub

• AC adapter

• USB cable

• User Guide

This hub is a plug and play device. It will automatically operate when the

USB cord is connected to the computer.

Connecting the Hub to Your Computer

NOTE: THE INCLUDED AC ADAPTER IS OPTIONAL AND ONLY NEEDED WHEN

PLUGGING IN DEVICES THAT REQUIRE MORE POWER.

AC adapter

Electrical Rating

Input: 100 - 240V ~

Output: 5V = 4A

Verifying Devices are Installed

You can view the devices installed on the 4-Port USB 3.0 Hub from the

Device Manager window in System Properties.

Right-click My Computer, Properties, then click the Hardware tab, and then

the Device Manager button.

Troubleshooting

Device Not Working

• Make sure that the device is fully inserted into the correct port on the

4-Port USB 3.0 Hub.

• Plug the device into a different port on the USB Hub. If it still doesn’t work,

test the device by connecting it directly to your computer.

• Verify that you ran the Setup or Install program for the device.

• Make sure that the device appears in Device Manager.

• Disconnect all devices from the hub and reconnect them, one at a time.

Check that each device works before plugging in the next one.

• Each USB port is equipped with over-current protection. Should a USB

device draw more current than the USB port can supply, the port will shut

down.

To re-enable the port, unplug the device and go to Device Manager or to

the message in the system tray and choose the Reset option. You can then

plug the device back into the USB port. If a shut down reoccurs, check the

power requirements of the device.

DC 5

V

Advertising