Texas Instruments TI-30Xa Solar - Manual (Page 14)

13
TI30XAUS.DOC MURFE pruning Pat Hatcher Revised:
06/17/99 4:31 PM Printed: 06/17/99 4:32 PM Page 13 of 21
Clearing and Correcting
| (battery)
& (solar)
Clears value (before operation key)
and
K , but not M1 , M2 , M3 , or STAT .
| |
(battery)
& & (solar)
Clears display, errors, all pending
operations and
K , but not M1 , M2 , M3 , or
STAT .
} |
(battery)
Clears display, errors, all pending
operations,
K , and STAT , but not M1 , M2 ,
and M3 . Sets DEG angle units, floating-
decimal format.
! (solar) Clears display, errors, all pending
operations,
K , STAT , M1 , M2 , and M3 .
Sets DEG angle units, floating-decimal
format.
L Deletes right-most character in
display.
0 : n Clears memory n .
" n Clears SCI or ENG notation.
" { N Clears FIX notation.
" h Clears all statistical data.
Constants (Repeated Operations)
A constant contains an operation and a value. To
establish a constant, press
" U after entering the
operation and value. J repeats the calculation.
Another operation, ! (solar), & (solar), or
| (battery) clears K .
8 D 7 " U K 7.
J K 15.
5 J K 12.
6.6 J K 13.6