1before initial use, 2safety instructions, 3disposal of the device (environment) – Topcom MAGIO 105 User Manual

Page 18: 4buttons (see folded cover page) 5 installation, 6ringer volume, 7last number redial

Advertising
background image

Topcom Magio 105

18

1

Before Initial use

This device has been designed and manufactured to comply with the
98/482/EC rule, referent to the Pan European connection of a terminal
to the Public Switching Telephone Network (PSTN) and following the
established guidelines by the 1999/5/EC Directive about radio electric
equipment and the reciprocal acknowledge of their conformity.
However, due to the fact that there are some differences in the PSTNs
from one country to another, the verifying measurements by
themselves do not set up an unconditional guarantee for an optimal
working in every connection point to the PSTN of any country.

2

Safety instructions

Do not place the basic unit in a damp room or at a distance of
less than 1.5 m away from a water source. Keep water away
from the telephone.

Do not use the telephone in environments where there is a risk
of explosions.

Clean the telephone with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive solvents.

3

Disposal of the device (environment)

At the end of the product lifecycle, you should not throw
this product into the normal household garbage but bring
the product to a collection point for the recycling of
electrical and electronic equipments. The symbol on the
product, user guide and/or box indicate this.
Some of the product materials can be re-used if you

bring them to a recycling point. By re-using some parts or raw
materials from used products you make an important contribution to
the protection of the environment.
Please contact your local authorities in case you need more
information on the collection points in your area.

4

Buttons (see folded cover page)

5

Installation

Plug the curly cable into the handset and the other end into your
network provider wall socket.

6

Ringer volume

The ring volume can be adjusted by means of the Ring Volume switch
(6) at the side of the phone (Hi-, Lo-).

7

Last number redial

To redial the last dialled number.

1.

LCD display

2.

Delete button

3.

Up button

4.

Dial button

5.

Down button

6.

Ring volume switch

7.

Hook switch

8.

Memory button

9.

Direct Memory 1

10.

Program button

11.

Mute button

12.

Flash button

13.

Redial/Pause

Pick up the handset.

The last dialled number will be dialled automatically

Be careful to keep these advice notes and if necessary
pass them on to a third party.

Advertising