Toastmaster TMT2 - Manual (Page 7)

6.
2-Slice Toaster Use and Care Guide
Bread Toasting Instructions
1. Place your Toaster on a flat, level surface.
2. Plug power cord into a 120V AC electrical outlet. The unit may
emit an odor and/or smoke during the first few uses from oils
used in manufacturing. This is normal for a new Toaster.
3. Set the Browning Selector Knob to the desired toast color.
Light (#1) is for warming and very light toasting; Dark (#7)
is for dark toasting.
4. Remove all protective wrappings from bread or toaster food
before placing in Toasting Slots.
5. Avoid toasting torn slices of bread and broken pastries, which
may get lodged in Toasting Slots.
6. Place bread or toaster food into one or both of the Toasting Slots.
Push down on the Toasting Lever to lower bread and begin
toasting process. Centering Guides will automatically center bread
for even toasting. When toasting a single slice, the bread may be
placed in either Toasting Slot, but may toast slightly darker on the
inside than on the outside.
NOTE: The Toasting Lever will not lock down unless the Toaster is
plugged into an electrical outlet.
7. When the selected color is reached, the Toasting Lever will pop
up. The Toaster will shut off automatically.
8. Unplug cord from wall outlet when not in use.
NOTE: To prevent a fire hazard, never place bread over the opening
of the Toaster, but always place it into the Toasting Slot.
NOTE: Do not operate the Toaster unless the Crumb Tray is in
position and correctly fitted.
9. To interrupt toasting, press the CANCEL Button.
TMR_TMT2_IB_11-8-06 8/11/06 4:43 PM Page 6