Topcom BUTLER 4570 - Manual (Page 17)

Topcom Butler 4570
EN
GLISH
Topcom Butler 4570 17
• Scroll to Handset Priority and press OK. Display highlights All Handsets. Press OK
to select All Handsets to make all handsets ring together.
Or
•
Scroll to Select Handset and press OK. Scroll or to the handset you want to ring
first. Press OK.
• Scroll or to select the number of rings at the handset before the other handsets
start ringing. Press OK to confirm.
8.3 LINE SETTINGS
8.3.1 Flash time
•
Press MENU then scroll to Base Settings and press OK. Scroll to Recall Mode and
press OK.
• Press or to highlight Recall 1 for short flash time (100ms) or Recall 2 for long flash
time (250ms) and press OK to confirm.
8.4 SYSTEM PIN
The System PIN is used for registering and deregistering handsets and some other optional
settings. The default System PIN is 0000.
•
Press MENU then scroll to Base Settings and press OK. Scroll to System Pin and press
OK.
• Enter the current PIN (Original setting 0000) and press OK.
• Enter the new PIN, press OK and enter it again.
• Press OK to confirm.
9 SMS TEXT MESSAGES
You can send and receive SMSs with your Butler 4570 telephone. This section tells you how
to use the SMS feature.You can store a total of 50 SMS messages sent and received, each
with up to 160 characters.
9.1 WRITING AND SENDING SMS MESSAGES
• Press MENU then scroll to SMS and press OK.
• Select Write Message and press OK to confirm
To use SMS, this service has to be activated on your phone line.
Normally you need to call a special number to get a subscription from your
telephone company to activate this function. Please contact your telephone
company for this service.