The Singing Machine SMM-106 - Manual (Page 2)

1. Wireless Microphone x 1
2. Microphone Receiver x 1
3. Microphone Antenna x 1
4. Microphone Cord with Cannon Jack and
∅
6.3 mm Jack x 1
5.
∅
3.5 mm Jack adapter x 1
Congratulations on your purchase of a Singing Machine SMM-106 Wireless Microphone! We at the Singing Machine know
that it will provide you and your friends with endless hours of entertainment. Inside you will find instructions on how to use
and maintain your SMM-106.
In the unlikely event that you will be using your SMM-106 Singing Machine Wireless Microphone in an area of high radio
frequency interference, you may need to temporarily make use of the non-wireless option by attaching it to the included
microphone cord.
Settings
The switch on your Singing Machine SMM-106 Wireless Microphone has three settings:
1. ON - The switch is in the top position. For wireless use, the microphone will function. The red indicator light is on. The
microphone will use battery power.
2. MIC - The switch is in the middle position. For non-wireless use, the microphone will function. If the battery is removed
from the microphone, the red indicator light will not be turned on.
3. OFF - The switch is in the bottom position. The microphone will not function. The red indicator light is off. The microphone
will not use battery power.
Important Note: When the microphone switch is set to OFF, noise may be generated from the karaoke machine. Please
make sure to reduce both the MASTER VOLUME and MIC VOLUME to the low level OR switch off the
receiver before turning off your microphone.
1. Insert one (1) AA battery into the Microphone by unscrewing the bottom.
2. Plug the Antenna into the bottom of the Microphone.
3. Insert one (1) AA battery into the slot located in the back of the Receiver.
4. Set the switch on the Microphone to the middle MIC position.
5. Plug the Receiver into the Microphone Input Jack of your Singing Machine karaoke machine.
6. Set the switch on your Singing Machine karaoke machine to the ON position.
7. Set the switch on the Receiver to the ON position.
8. Set the switch on the Microphone to the top ON position.
Your Singing Machine SMM-106 Wireless Microphone is now ready for wireless use!
NOTE: If you encounter minor interference during wireless use, please adjust the tuning screw on the Receiver, and roll up
the plastic Receiver Antenna. Excessive interference will require temporary non-wireless use.
1. Plug Cannon Jack into the Microphone instead of the Antenna, making sure that the three holes line up with the three
prongs in the base of the Microphone.
2. Plug the Microphone Cord into the Microphone Input Jack of your Singing Machine karaoke machine.
3. Set the switch on your Singing Machine karaoke machine to the ON position.
4. Set the switch on the Microphone to the MIC position.
Your Singing Machine SMM-106 Wireless Microphone is now ready for non-wireless use!
NOTE: For best non-wireless performance, please remove batteries from the Microphone prior to non-wireless use.
1 2
3 4 5
Contents
Microphone Details
Instructions For Wireless Use
E1
Instructions For Non-Wireless Use
E
N
G
L
IS
H