TMI Products TMI 1402A - Manual (Page 2)

Web-Enabled Instrument Server
Telemonitor, Inc. TMI 1402A
9055F Guilford Road • Columbia, MD 21046 • (410)312-6664 • Fax (410)312-6692 • www.telemonitor.com
CogniSense is a registered trademark of Telemonitor, Inc. Rev. 1.01 03/09/2007
®
• STIM: TMI 1451.2-SC Documentation and Software
SC_Guide.pdf - TMI 1451.2-SC Application Guide
Includes instructions for using the STIM Configuration Utility, and application notes for using the
module with various types of sensors.
SCUVxxx.exe - STIM Configuration Utility
For use with STIMs manufactured by Telemonitor, Inc. This utility is used for configuring the
signal conditioning ASIC in the STIM, and MUST be used for loading TEDS into the STIM. The
TEDS loading function provided as part of the NCAP Web pages will not work with a TMI STIM.
STEP 3:
CONFIGURE THE HARDWARE
• Configure the NCAP and set the IP address.
Please follow the instructions in the HPIE documentation.
• Configure the STIM (if desired).
The STIM is shipped with the analog channels set to mode 2 (single-ended) and are calibrated for a
0-4 V input range. Please follow the instructions in the TMI 1451.2-SC Application Guide if you need
to change this configuration.
• You are now ready to connect your own sensors, calibrate, and view data.
Please refer to the examples in the TMI 1451.2-SC Application Guide.
TECHNICAL SUPPORT
Agilent Technologies no longer provides technical support for the NCAP. Telemonitor, Inc. provides
technical support for the STIM and will try to provide support for the NCAP. Therefore, all issues related
to the development system should be directed to Telemonitor, Inc.