Toshiba SATELLITE A500 - Manual (Page 185)

185 If Something Goes Wrong
The Windows ® operating system is not working
Using Startup options to fix problems
If the operating system fails to start properly, you may have to
change your system’s configuration or verify the startup procedure
to fix the problem. To do this, use the options in the Startup menu.
To open the Startup menu:
1 Restart your computer.
2 Press F8 when your computer starts and before Windows ® starts
loading.
The Windows ® Advanced Boot Options menu displays these
options:
❖ Repair Your Computer
❖
Safe Mode
❖
Safe Mode with Networking
❖
Safe Mode with Command Prompt
❖
Enable Boot Logging
❖
Enable low-resolution video (640x480)
❖
Last Known Good Configuration (advanced)
❖
Directory Services Restore Mode
❖
Debugging Mode
❖
Disable automatic restart on system failure
❖
Disable Driver Signature Enforcement
❖
Start Windows ® Normally
When you highlight each option using the arrow keys, Windows ®
displays information about each option at the bottom after
Description.
See your Windows ® documentation for further explanation.
If your computer is connected to a network, the Startup menu may
display different versions of Safe mode. NOTE