Tyco Voice Assisted Security Control Escort 4580 - Manual (Page 5)

5
Arming The System
How To Arm the System
Access the security system using the steps described in the Accessing Your Security System section of this
manual.
Select a Partition to arm as described in the Accessing Partitions section of this manual.
If the selected partition is ready to be armed, the system will announce:
“To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code”
Enter your [Access Code]. The system will announce
“Turning Partition One on. Exit Delay in Progress. “Turning Partition One on. Exit Delay in Progress. “Turning Partition One on. Exit Delay in Progress. “Turning Partition One on. Exit Delay in Progress. “Turning Partition One on. Exit Delay in Progress.
To turn partition One off, enter your Access Code” To turn partition One off, enter your Access Code” To turn partition One off, enter your Access Code” To turn partition One off, enter your Access Code” To turn partition One off, enter your Access Code”
If the selected partition is not ready to be armed, the system will announce
“To turn Partition One on enter your Access Code. “To turn Partition One on enter your Access Code. “To turn Partition One on enter your Access Code. “To turn Partition One on enter your Access Code. “To turn Partition One on enter your Access Code.
Secure the system before turning on” Secure the system before turning on” Secure the system before turning on” Secure the system before turning on” Secure the system before turning on”
When the “Secure system before turning on” message is heard, ensure that all zones on the partition are secure
before trying to arm the partition.
At-Home Arming
At-Home Arming allows you to arm the system and remain on the premises. At-Home Arming also cancels the
Entry Delay on the Entry-Exit Doors so that an alarm will sound immediately if the Entry-Exit Door is opened.
When the system announces
“To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code” “To Turn Partition 1 on Enter Your Access code”
Activate the At-Home arming feature by pressing [
✱]. The system will announce
“To turn Partition One on without entry delay press [9]” “To turn Partition One on without entry delay press [9]” “To turn Partition One on without entry delay press [9]” “To turn Partition One on without entry delay press [9]” “To turn Partition One on without entry delay press [9]”
Press [9]. The system will announce
“Enter Your Access Code” “Enter Your Access Code” “Enter Your Access Code” “Enter Your Access Code” “Enter Your Access Code”
Enter your access code. The system will then announce
“Turning Partition One on. Exit Delay in progress” “Turning Partition One on. Exit Delay in progress” “Turning Partition One on. Exit Delay in progress” “Turning Partition One on. Exit Delay in progress” “Turning Partition One on. Exit Delay in progress”
The selected partition will now be armed in the At-Home Mode. Opening the Entry-Exit Door will now sound an
immediate alarm.