Toshiba DVD-ROM DRIVE SD-M1712 - Manual (Page 4)

CD
• CD-DA
• CD+(E)G
• CD-MIDI
• CD-TEXT
• CD-ROM
• CD-ROM-XA
• CD-I Bridge (Photo-CD, Video CD)
• CD-I
• Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)
• CD-R (Read)
• CD-RW (Read)
Front Panel
Figure 1.SD-M1712 DVD-ROM Drive Front Panel
Loading Tray Load disc using tray.
Busy Indicator When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it
attempts to locate the disc. One of the following will occur:
• BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.
• BUSY light flashes slowly. The disc may be dirty.
• BUSY light remains ON. The DVD-ROM is accessing data.
• BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error
Eject
Button
The Eject button is used to open the disc tray so you can install or remove a disc.
Emergency
Eject Hole The emergency eject hole is to be used only when the Loading Tray will not open when
Eject button is pressed.