Toshiba 1805 - Manual (Page 90)

90 Learning the Basics
Setting up for communications
Using a wireless connection
NOTE: Using this functionality requires an optional Wi-Fi™
module.
If you do not have a Wi-Fi™ module installed, you will need
to connect using a PC Card device.
For information on how to set up a wireless connection, refer to
your wireless networking device documentation or your network
administrator.
Connecting your computer to a network
You can connect your computer to a network locally or remotely.
❖ Locally, using the built-in 10/100 Ethernet LAN adapter by
connecting it to a standard RJ45 LAN line, or by using the
optional Wi-Fi module. For more information about wireless
networking, refer to your network administrator.
❖ Remotely, using the built-in modem and a dial-up connection.
For specific information about connecting to the local area
network (LAN) or wide area network (WAN), consult your
network administrator.
Setting up a modem connection
NOTE: It is recommended that you do not use the infrared
port at the same time as either playing audio or connecting
to the internet via a modem. Audio quality may be reduced
and the modem connection may be slower or disrupted.
To use a dial-up connection, have your network administrator
configure your computer for the network and supply you with the