Tandberg Data T40 - Manual (Page 18)

10 Unpacking the StorageLibrary
To unpack the StorageLibrary, follow the instructions below.
1. Carefully unpack the unit from the shipping container. Save the container and packing materials in
case you need to transport the StorageLibrary in the future. The packaging is specifically
designed for the library to ensure it is not damaged during transportation.
2. The StorageLibrary could be lifted by one person if drives, power supply, and magazines are
removed. However, for absolute safety, it is recommended that two people lift the StorageLibrary.
Full library weight = 38 kg / 84 lbs (2 FH drives). Empty library weight = 23.6 kg / 52 lbs (does not
include drives, magazines or power supply).
3. Review the contents of the shipping container to be sure that all parts were included in the
shipment and no parts are damaged. A standard package for the StorageLibrary consists of the
following items:
A factory-assembled StorageLibrary unit containing four cartridge magazines
A standard accessory kit containing:
Printed copy of the Quick Start Guide
1 Warranty/Registration Information
Rack mounting kit including rack mount ears
2 power cords: one for USA/Japan and one for European power outlets
1 Ethernet cable
Media barcode label kit (contains media labels and cleaning cartridge labels)
There will be variations of this list. Depending on the number of drives in your library and whether
or not your library is equipped with SCSI or FC drives, the accessory kit may contain a terminator
and SCSI cable.
The StorageLibrary accessory kit contains no cartridges.
4. Complete product registration online at http://www.tandbergdata.com , Support, Register Your
Product.