Tannoy C702 - Manual (Page 56)

54 Connectivity
Power saving
You can save battery power with the
Power save function. You can only
connect with one Bluetooth device at a
time when using Power save. You must
turn this function off if you want to
connect with more than one Bluetooth
device at the same time.
To turn Powersave on
• From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Powersave > On .
Transferring sound to and from
a Bluetooth handsfree
You can transfer the sound to and from
a Bluetooth handsfree using a phone
key or the handsfree key.
To transfer sound
1 From standby select Menu > Settings
> the Connectivity tab > Bluetooth
> Handsfree > Incoming call .
2 Select an option. In phone transfers
sound to the phone. In handsfree
transfers sound to the handsfree.
To transfer sound during a call
1 During a call, select Sound .
2 Select from the list.
Using the USB cable
You can connect your phone to a
computer with the USB cable to transfer
files, synchronize and use your phone
as a modem. For more information
go to the Getting started section at
www.sonyericsson.com/support.
Before you use the USB cable
See Required operating systems
on page 39.
Only use a USB cable supported by your
phone. Do not remove the USB cable
from your phone or computer during file
transfer as this may corrupt the phone
memory or the memory card.
This is the Internet version of the User's guide. © Print only for private use.