Toshiba GN-2010 GN-2010 - Manual (Page 15)

1 SETTING UP BLUETOOTH
Setting up Bluetooth HCRP Printing 13
Setting up Bluetooth HCRP Printing
When the Bluetooth is enabled, users can operate printing through the Bluetooth from Windows computers or Macintosh
computers (Mac OS X 10.4.4 or later recommended) that have the Bluetooth module and have the capability for the HCRP
connection.
Before setting up Bluetooth HCRP printing, please make sure the Bluetooth module that is installed in your computer
supports the HCRP profile.
The instructions on how to set up the HCRP connection and the printer driver vary depending on the Bluetooth module
that you connect or install on the computer. For instructions on how to set up the HCRP connection, please refer to the
documentation of the Bluetooth module.
Please carefully read the documentation of the Bluetooth module for operation
y The “Enable SNMP Communication” option and the [Update Now] in the Configuration tab of the printer driver does
not work for Bluetooth connection.
y More than two devices cannot connect to the equipment through Bluetooth at the same time.