Maintenance, Caution – Toshiba MMU-AP0071MH User Manual

Page 31

Advertising
background image

28

10

MAINTENANCE

Prior to maintenance, ensure the power supply is turned off.

CAUTION

Do not handle the buttons with wet hands as this will cause the risk of electric shock.

Daily maintenance

Cleaning of air filter

1

If

is displayed on the remote controller, maintenance

to the air filter is required.

2

Clogging of the air filter decreases cooling/heating efficiency.

3

After cleaning, push the

FILTER

RESET

.

display disappears.

[4-way Air Discharge Cassette Type]

1

2

5

1,
2

3

ON / OFF

FAN

TEMP.

SWING/FIX

TIME

MODE

VENT

UNIT

SET

CL

FILTER
RESET TEST

TIMER SET

CODE No.

Cleaning of air outlet flap

The air outlet flap can be removed to clean if necessary.

1

Remove the air outlet flap.

• Holding both ends of the air outlet flap, remove it by sagging the center downwards.

2

Clean the air outlet flap with water.

• If dirt is heavy, clean the air outlet flap using tepid water with neutral detergent or just water.

3

Mount the air outlet flap.

• First push in the one side, and insert the opposite side by sagging

the center downwards.

Be careful to insert the flap in the correct direction.

Insert the flap with the printed mark facing upwards, and
the arrow on the flap pointing in the outward direction.

1

Open the air inlet grille.

• Slide the air inlet grille buttons to detach the air

inlet grille from the main ceiling panel. Lower the
grille slowly whilst holding.

2

Take out the air filter.

• Push the extrusion of the air filter away from the

grille and remove.

3

Cleaning with water or vacuum cleaner

• If dirt is heavy, clean the air filter using tepid water

with a neutral detergent or just water.

• After cleaning with water, dry the air filter

sufficiently in a shaded place.

4

Mount the air filter.

5

Close the air inlet grille.

• Close the air inlet grille, slide the button to locate

into the ceiling panel fixing securely.

6

Push the

FILTER

RESET

.

display disappears.

1

2

3

3

Air inlet grille

Button

Strap to
prevent falling

Air filter

Push

Air inlet grille

Button

1

Insert

2

Insert in the flap sagging
down the center downward.

Advertising