Tannoy iw62 TDC - Manual (Page 2)

Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473 E: [email protected]
E: [email protected]
E: [email protected]
E: [email protected]
iw62 TDC
Tannoy adopts a policy of continuous improvement and product specification is subject to change iW62TDC data file issue:1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
Frequency Response (-3dB) (1) 70Hz - 51kHz
Frequency Range (-10dB) (1) 34Hz - 54kHz
System Sensitivity (1W @1m) (2) 92dB (1W - 2.83V for 8 Ohms)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 120 degrees conical
Directivity Factor (Q) 4.6 averaged 1kHz to 6kHz
Directivity Index (DI) 6.0 averaged 1kHz to 6kHz
Rated Maximum SPL (3)
Average 112dB
Average 110dB (with optional THP60 transformer)
Peak 118dB
Power Handling
Average 105W
Programmed 210W
Peak 420W
Recommended Amplifier Power 210W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full Power (5.5V)
2nd Harmonic 3rd Harmonic
250Hz 0.64% 0.06%
1kHz 0.6% 0.52%
10kHz 0.69% 0.06%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.18% 0.11%
1kHz 0.08% 0.23%
10kHz 0.27% 0.17%
Crossover Passive, 750Hz, 1.8Hz, 16Hz
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Dual Concentric™ Point source constant directivity drive unit
Low Frequency 1 x 165mm (6.50”) with multi fibre paper pulp cone
High Frequency 19mm (0.75”) titanium dome with neodymium
magnet system
Supertweeter™ 19mm (0.75”) titanium dome with neodymium
magnet system
Low Frequency 1 x 165mm (6.50”) additional bass driver
Physical
Enclosure Baffle UL 94V-0 rated ABS
Grille Steel, with weather resistant coating
Optional accessory: Back can Zinc plated steel
Clamping Design Eight way self aligning security toggle clamp system
Connectors Gold plated connectors with spring terminals
Hole Cutout Size 426.10 x 187.6 (16.76 x 7.39”)
Maximum wall thickness - 25mm (1.00”)
Dimensions
Front Baffle 473.5mm x 227mm (18.64” x 8.94”) (H x W)
Front of wall to rear 99mm (3.90”)
of magnet assembly
Net Weight 5kg (11lbs)
Included Accessories Painted mask, cutout template, grille
Optional Accessories Steel back can
Steel back can with THP60 transformer
Plaster (mud) ring
Transformer Taps (optional)
70V 60W / 30W / 15W / 7.5W / OFF & Low Impedence operation
100V 60W / 30W / 15W / OFF & Low Impedence operation
System iw62 TDC Transducers
8000 3770 iw62 TDC White 1
PART NUMBER PACKED QUANTITY COLOUR MODEL NAME
Ordering Information