2 authentication and security – Topcom SKYR@CER USB 4001G User Manual

Page 15

Advertising
background image

Parameter Description

RTS Threshold

Minimum packet size required for an RTS (Request To Send). For

packets smaller than this threshold, an RTS is not sent and the

packet is transmitted directly to the wireless network. Select a

setting within a range of 0 to 2347 bytes. Minor change is

recommended.

Fragment Threshold

The value defines the maximum size of packets; any packet size

larger than the value will be fragmented. If you have decreased

this value and experience high packet error rates, you can

increase it again, but it will likely decrease overall network

performance. Select a setting within a range of 256 to 2346 bytes.

Minor change is recommended.

Channel

This setting is only available for Ad Hoc mode. Select the number

of the radio channel used for the networking. The channel setting

should be the same with the network you are connecting to.



3.2.1.2 Authentication and Security

Parameter Description

Authentication Type

This setting has to be consistent with the wireless networks that

the adaptor intends to connect.

Open – No authentication is needed among the wireless network.

Shared – Only wireless devices using a shared key (WEP Key

identified) are allowed to connecting each other.

12

Advertising