Topcom Twintalker 6800 - Manual (Page 12)

12 Topcom Twintalker 6800
Topcom Twintalker 6800
b. Sending a call Tone
Press briefly. The call tone will be transmitted for 3 seconds on the set channel.
13.12 Roger Beep On/Off
After the - button is released, the unit will send out a roger beep to confirm that you have
stopped talking.
To set the Roger Beep.
• Press
5 times. ‘ro’ will be displayed.
• Press to enable (ON) or disable the Roger-Beep (OF).
• Press to confirm your selection and return to the standby mode.
13.13 Key-Tone On/Off
When a button is pressed, the unit will beep briefly.
To set the key-tone.
• Press
6 times. ‘to’ will be displayed.
• Press to enable (ON) or disable the Roger-beep (OF).
• Press to confirm your selection and return to the standby mode.
13.14 Dual Channel Monitor function
In stand-by, the PMR is set on one set channel with CTCSS code. The PMR will only receive
signals transmitted on that channel and CTCSS code.
Dual Channel Monitor allows you to monitor a second channel with CTCSS code.
• Press 7 times, DCM OFF appears on the display.
• Press or to change the channel.
• Press to confirm the channel selection and go to CTCSS SUB-
CHANNEL SELECTION
• Press or to change the CTCSS.
• Press to confirm.
To disable the function select ‘OFF’ when setting the channel.
When the Dual Channel Monitor function is activated, the PMR will switch sequentially be-
tween the standby channel + CTCSS and the Dual Channel + CTCSS.
PTT
PTT
PTT
PTT