Tricity Bendix CSIE 510 - Manual (Page 13)

13
SETTING THE CONTROLS FOR
AUTOMATIC USE
This is very easy. All you have to do is work
through the steps below. The clock will work out
the rest for itself.
1 Is the electricity supply on?
2 Is the clock
showing the
correct time?
To adjust turn the selector knob
to
‘Manual’ then to ‘Time
Setting’. Turn the setting knob in
either direction.
3 How long
will the food
take to cook?
Turn the selector knob to ‘Cook
Time’. Then turn the setting knob
until the length of time you want
the food to cook shows in the
display. The maximum cooking
time is 10 hours.
‘Auto’ will
show in the display.
4 What time do
you want the
food to be
cooked by?
Turn the selector knob to ‘End
Time’.
Turn the setting knob
until the time the oven is to
switch off shows in the display.
The cookpot (
) will go out.
The ‘End Time’ must not be
more than 23 hours 59 minutes
from the time of day.
For
example if the time of day is 9.00
am the latest ‘End Time’ will be
8.59 am the next day.
5 Set to
automatic.
Turn the selector knob to
‘Automatic’.
6 Turn on the
oven control.
Turn the oven control to the
required setting.
The time shown on the right gives an example of
setting the automatic controls when the time is
9.00 am, the food is to be cooked for 2½ hours and
the food is needed at 6.00 pm (1800 hours).
The clock will work out what time the oven will
switch itself on and it will turn the oven off at the
end.
Once the automatic sequence is finished
there will be an alarm to remind you that you need
to set the oven for manual operation. To do this
turn the selector knob to ‘Manual’. Turn off the
oven control.
If you change your mind and want to cancel a
programme that you have set simply turn to ‘Time
Setting’ and then to ‘Manual’.