Timex Bodylink 117-095000 - Manual (Page 26)

1-43
• WEEKENDS – The Alarm will occur at the selected time on
Saturday and Sunday only.
• ONCE – The Alarm will sound one time only, at the selected
time and then disarm itself.
4. Press SET/FORMAT (SELECT) to begin setting the Alarm time,
starting with the hour value. Note that the AM/PM value is also
flashing (if the watch is set for 12-hour display format) and is
set concurrently with the hour value.
5. Press DISPLAY ( + ) or STOP/RESET ( – ) to set the hours, then
press SET/FORMAT (SELECT) to move to the tens of minutes and
minutes digits, setting them in the same way.
6. Press SET/FORMAT (SELECT) to set the alarm either ON or OFF.
7. Press MODE (DONE) to save your changes and exit the setting
state.
NOTE: If you changed any of the Alarm settings, the Alarm will
automatically arm itself.
1-42
Configure Mode
Configure mode allows you to set a number of options that make
operations in the other modes easier and more useful. The set-
tings in this mode are divided into four groups:
• WATCH SETTINGS – Night-Mode, Hourly Chime, Button Beep
and Length Unit settings are in this group.
• HRM SETTINGS – Set up your heart rate target zone.
• S+D SETTINGS – Configure speed or pace smoothing, speed/
pace zone alerts and the distance alert feature.
• HANDS-FREE SETTINGS – Want the Chrono to start, stop and
take splits automatically when using the Speed + Distance
Sensor? This is where you’d go to configure that feature.
Navigating Through the Options
The options in this mode are arranged in a two-tier, menu-like
hierarchy. We’ve provided a map depicting the layout of the mode
on the inside back cover. Check it out if you want to see the rela-
tionship of all the parameters in the mode. Navigating through the
options is straightforward:
• Press DISPLAY ( ᮡ) or STOP/RESET ( ᮢ) to move to the next or
previous option display or group heading.