Topcom Wireless Kit 108MBPS - Manual (Page 5)

Topcom Wireless Kit 108Mbps 5
Topcom Wireless Kit 108Mbps
EN
GL
ISH
3 Verify your PC's IP configuration
As the connected computers are configured as DHCP-client, the router will provide an IP
address to the computer when it is connected properly to one of the LAN ports (or Wireless
by use of a wireless adapter).
To check if your computer received a LAN IP address, you can use the Windows utility.
This verification is only required in case you have problems to get connected to the router.
• WINIPCFG (for windows 95/98)
Click the Start button, select Run and type winipcfg. In the example below this computer
has a IP address of 192.168.1.100 and the default gateway is 192.168.1.1. The default
gateway should be the broadband router IP address.
• IPCONFIG (for windows 2000/NT)
Click the Start button, select Run and type cmd. Now the DOS screen will open. In the
DOS command type IPCONFIG and press Enter. Your PC IP information will be
displayed as shown below.
You can also type
winipcfg in the DOS command.