The Singing Machine 7 Pad Electronic Drum Set SMI-1452 - Manual (Page 8)

[1] Turn on the power
Turn the [POWER] switch ON.
The LED Display will light up.
[2] Start the Demo Song
Press the [DEMO] button, the demo song will start and
the LEARNING indicator will illuminate at the same time.
At this time the demo song is starting in learning mode,
the LED of the drum pads will flash by following the rhythm
of the demo song. To exit the learning mode, press
[LEARNING] button again.
The overall volume level of the instrument is controlled by
a [MASTER VOLUME] knob.
Turn the [MASTER VOLUME] knob clockwise to increase
the overall volume. To decrease the volume, turn the knob
counter-clockwise.
The song volume level is controlled by two [SONG
VOLUME] buttons (volume levels 0-9)
The SONG VOLUME can be used to adjust the balance
between
the song accompaniment and your own
performance on the pads.
Press the top [SONG VOLUME] button to increase the
song volume by one level. Press the bottom [SONG
VOLUME] button to decrease the song volume by one
level. Holding either of the buttons increase or decrease
the song volume level rapidly.
•
•
MASTER VOLUME
SONG VOLUME
E08
Playing the Demo Song
FUNCTION
The Digital Drum Set includes a demo song to demonstrate performance of the drums. To play the
demo song, follow the instruction below:
ON
OFF
POWER
DEMO
M
AS
TER VOLUM
E
- +
SONG
VOLUME
[3] Stop the Demo Song
To stop playback, press either the [DEMO] button again
or the [START/STOP] button.
DEMO START/STOP
English