Topcom WRIST 3301 - Manual (Page 12)

12
TOPCOM BPM WRIST 3301
12 MEMORY
The BPM 3301 has 3 Memory zones. Each can
store up to 30 measurements including the date
and time
To store measurement results:
• After the measurement, press the
PROGRAM button to select the memory
zone 1 or 2 in which you want to store the
measurement result.
• Press the MEMO button to confirm.
To recall measurement results:
• In stand-by, press the PROGRAM button
to select the memory zone 1 or 2 from
which you want to recall the measurement
result.
• Press the RECALL button to confirm. The
last measurement will be shown first.
Every new press of the RECALL button
calls for one prior value stored.
When the batteries are installed, the data in the memories
will not be lost even when the Blood Pressure Monitor is
switched off.
Remove the batteries for more than 10 seconds to erase the
memories.