Toshiba TK6234A5 - Manual (Page 19)

iIS-010 series product specification
Ver. B (Oct. 12 200 )
Take a picture Taking a still or frozen picture
Location setup
Position / Angle Settable search area and search pattern
Origin Properties Moving the origin to another location
Locator Properties Confidence / Position / X / Y/ Rotation
Naming each measurements
Setting Tolerance
Edge Sensitivity Settable from 1 to 100
Inspection tools
Perpend Line-Line measure the perpendicular distance between two edges
Line-Line measure the distance between two edges
Point-Point measure the distance between two points
Point-Line measure the distance between one edge and one point
Angle measure the angle between two edges
Corner define a corner point, or measure the angle between two edges.
Circle define a point, or measure the diameter or circularity of a circle
Circle-Circle measure the distance between 2 circle centers
Circle-Line measure the distance from a circle center to an edge
Point-Circle measure the distance between a circle and one point
Concentric Circles measure the distance from each circle center, to the average center
Ruler Properties Naming measurement
Setting Tolerance (settable units on the measurement)
Settable Accuracy from 2 to 50
Track locator (Enable / Disable)
Angle Properties Naming measurement
Setting Tolerance
Settable Accuracy from 2 to 50
Track locator (Enable / Disable)
Circle Properties Diameter / Circularity
Naming measurement
Setting Tolerance (settable units on the measurement)
Settable Accuracy from 8 to 72
Track locator (Enable / Disable)
Concentricity Properties Naming measurement
Setting Tolerance
More inspection tools
ROI (Region of Interest) Selectable the shape (Line / Rectangle / Circle / Poly)
19
D4130145B