Unisar BR143 - Manual (Page 2)

INTRODUCTION
Thank you for purchasing the BébéSounds
® Fever Monitor.
This Fever Monitor will enable you to continuously monitor
your baby’s fever without having to disturb her. Use the
Fever Monitor when your baby is not feeling well and is
feverish, or if your child is prone to extreme spikes in
temperature.
The Fever Monitor keeps track of your baby’s temperature
from the surface of the skin. It clips to the diaper or
pajamas with the sensor probe resting against the skin.
Be sure the sensor probe is touching your baby’s skin and
that your baby is wearing clothing that covers the stomach
as well as the monitor to avoid the loss of body heat.
The Fever Monitor will alert you if your baby’s fever spikes
up one degree. For example, if your baby’s temperature
is 100°F (37.8°C) and goes up to 101°F (38.3°C), the
Fever Monitor will continuously beep until you reset it. If
the Fever Monitor loses contact with your baby’s skin it
will also beep continuously until you readjust it. These
beeps are gentle enough not to wake your baby but loud
enough to be picked up by your sound monitor so you can
sleep more easily when she is not feeling well.
You may also use the probe of the Fever Monitor as an
oral thermometer to get an accurate temperature reading
and to compare the temperature registered from the skin
with the temperature registered with a more conventional
method. Remember to clean the probe with alcohol with
each use.
Use of the Fever Monitor should not replace a visit to your
doctor. It is recommended that you advise your doctor
any time a temperature is above 100°F (37.8°C).
NOTE: This product is intended for use with children
under 8 years old.
WARNING: This product is not a toy. Do not allow
children to play with it. Keep out of children’s reach when
not in use. Always use under adult supervision.
If you have any questions about our Fever Monitor, please
call our tech support line toll free at 888.232.6476
Monday–Friday, 9:00AM-5:00PM EST.
KEY FEATURES
• Your baby’s fever is continuously monitored, even while
you sleep
• You can check her fever level without disturbing her
• The monitor beeps if temperature rises 1°F
• The monitor beeps if the probe loses contact with the skin
• Beeps can be picked up by your sound monitor but are
soft enough so they don’t wake your baby
• Can also be used as an oral or underarm thermometer
• Water-resistant
• Non-invasive
• Battery life: 6 Months
• Easy-to-read LCD display
• Low battery warning
• Measures in Fahrenheit
INSTRUCTIONS FOR USE AS A FEVER MONITOR
1. Clean the probe with alcohol.
2. Press the Power button and listen for one beep and
release. This indicates the Fever Monitor is ready to
start taking a temperature reading.
3. After approximately 10 seconds it will beep twice and
the horn icon will flash. The icon will stop flashing after
approximately 15 seconds indicating it is ready to enter
Fever Monitor Manual 7/26/05 10:02 AM Page 2