Universal Scheu Company 1005 - Manual (Page 10)

Model 1005 24-Port 12 7 Ethernet™ Repeater Hub
3. INSTALLATION
To install the Model 1005 Repeater Hub:
• Unpack the Model 1005 Repeater Hub.
•
Install Model 1005 Repeater Hub on flat surface.
• Optionally install Slide In Card.
• Connect Cable to SIC and RJ-45 connector.
• Connect Model 1005 Repeater Hub to power.
Direction is provided in the pages that follow.
Unpacking the Model 1005 Repeater Hub
The Model 1005 Repeater Hub packing contents should include the
following:
Item Part Number
Model 1005 Hub E- TBT-HB-1005
Power Cord 3344, 3347, 3348, 3349, or 3523,
(depending upon power configuration
in country where installed)
User’s Guide 7368
In addition, any of the following optional SICs may be included:
Item Part Number
Thinnet Coaxial E-CX-SIC
Fiber Optic E-FRL-SIC
Twisted Pair E-TBT-SIC
Female AUI E-AUI-DT-SIC
Male AUI E-AUI-DC-SIC
Bridge E-BR-SIC
Redundant Fiber Optic E-FL/RED-SIC
Female AUI Connector/10Base5 or Transceiver
Connection
The female AUI card (E-AUI-DT-SIC) provides a female AUI connecto.r
for connection to 10Base5 through an AUI drop cable or to 10Base2,
10BaseT, or10BaseFL through a transceiver NOTE: The bridge card (E-
BR-SIC) also provides a female AUI connector.
Connecting 10Base5 Using AUI Drop Cable
To connect 10Base5 Cable to a
female AUI connector:
1. Locate or build IEEE 802.3
compliant AUI drop cable.
2. Connect AUI drop cable
male connector to the
female AUI (DTE) connector
on repeater.
3. Connect AUI drop cable female connector to the AUI port on
a transceiver or media attachment unit (MAU).
Connecting to Network Using Transceiver
To connect to a network using transceiver:
1. Locate IEEE 802.3 compliant transceiver with male AUI
connector and correct network media connector.
2. Connect transceiver male AUI connector to the female AUI
connector.
3. Connect transceiver network media connector to the network
T O F IBER , C OAX ,
O R T WISTED P AIR