Unitech Hand Held Scanner - Manual (Page 27)

Page 26
Checks if the original data has 'A' at position 3, 'B' at position '4' and
last character is '?'.
MATCH , 10 , " *A*",
Checks if the original data includes a string with a digit as first
character and "A*" followed at position 10.
7.5. Modifier
Modifier has two types of fields: A-String and O-String to define the
output contents.
7.5.1. A-String
Format:
"abc..."
'a', 'b' and 'c' in the string can be any character.
A-String defines a string of characters to be added to the output. For
example, if the original data is:
BCD
and output string is
BarCoDe
"ar", 'o' and 'e' in output string are added strings and can be defined by
A-Strings.
Note: If '*' on Programming Sheet are included in A-String, one
interblock delay defined by Group 2 will be inserted.
7.5.2. O-String
Format:
O-STR , P, N,
O-String always applies to the original data. It contains two
parameters. The first is position parameter (P) that specifies the start
output position in the original data. Parameter N tells how many
characters will be included beginning from P.
Example:
Original data is:
Barcode
Then
O-Str , 4, 4,
Gives output as
code
Note:
-- N can be '#' for all remaining characters from P.
-- If P greater than the length of original data, the O-String will be
skipped.