Uniden BTS150 - Manual (Page 5)

English - 5
4. The LEDs flash blue while the battery is charging (charge time = 7.5 hours on a
completely empty battery). The LEDs turn solid blue when the battery is fully charged.
Your battery must be fully charged before you can use your speaker.
Turn on Your Speaker
When you turn on your speaker for the first time, it automatically goes into pairing mode.
The LEDs rapidly flash red and blue while in pairing mode. After you pair Bluetooth devices
to your speaker, the next time you turn it on it searches for these paired devices and then
moves into a standby state.
1. Slide the main power switch to the ON position.
2. Press and hold for at least 3 seconds. A “power on” tone sounds.
3. The LEDs flashes blue and red slowly while looking for Bluetooth devices. It remains
steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps flashing.
Pair Bluetooth Devices to Your Speaker
Make sure your speaker has been fully charged and is in pairing mode.
Pair First Bluetooth Device
Pair your first Bluetooth device to your speaker when you turn your speaker on for the first
time. Be sure your speaker is in pairing mode (see page 6).
1. Select a Bluetooth V2.0 device (mobile phone or music player) to pair.