Uniden BC355N - Manual (Page 33)

33
Scanning Service Bank Tips
If You Want to do
This - Here’s How -
Begin scanning Press any service bank key; the bank label
flashes and the SCAN message moves
across the display screen. Scanning
automatically stops on an active channel
and displays that frequency (except for
locked-out channels, which will be covered
later in this guide). It will stay on that
channel until the transmission ends.
Note: You must program channels
into the PRIVATE bank before you
can scan it .
Set up multiple
service banks to
scan Press a desired service bank’s key until it
displays. Continue pressing other banks’
keys until all desired banks are displayed
(activated).