Uniden PCW300 - Manual (Page 11)

Wireless PC Card
19
Connected: Displays which access point is connected with
your PC Card.
Network: Indicates the type of wireless network being used.
Transmit Rate: Shows the data transmission rate.
Channel: Displays the wireless channel in operation.
Encryption: Indicates the encryption status.
Signal Strength: Shows how strong the wireless signal is
being received from the access point.
Link Quality: Displays the clarity of the current channel.
Wireless PC Card
20
Configuration
The Configuration screen allows you to customize the
settings of your PC Card for your wireless network.
The Network Type setting determines the architecture of your
wireless network. You should select Access Point mode or
Peer-to-Peer mode depending on your network type. The
Access Point mode, which is most commonly used and is
also known as “Infrastructure Mode”, allows you to be
connected wirelessly to an existing wired network through an
Access Point. Peer-to-Peer mode, also known as “Ad-Hoc”
mode is used to connect directly to another computer without
an Access Point.
For Peer-to-Peer connections, you will need to specify the
frequency channel and SSID.