Racing Electronics BC72XLT User Manual

Page 45

Advertising
background image

45

Special Features

Storing Frequencies Found During Direct
Entry Search into Channel Memory

Follow these steps to store frequencies received
during direct entry search mode or direct entry
search hold mode.

1. Press Func + Pgm in direct entry search mode

or direct entry search hold mode. The frequency
and lowest blank channel alternate on the
display.

2. Press E to store the frequency into the blank

channel. To select another channel, repeatedly
press Func + or Func + to select the blank
channel you want, then press E. You can also
use the 0-9 keys to select the bank.

If you enter a frequency that has already been
entered elsewhere, the scanner sounds an error
tone and displays the channel that was duplicated. If
you entered the frequency by mistake, press .
To enter the frequency anyway, press E to accept.

The scanner moves to program mode after you
stored the frequency.

Search Skip Memory

You can skip up to 50 specified frequencies during a
search. This lets you avoid unwanted frequencies or
those already stored in a channel.

Notes:

You cannot skip frequencies during WX service
search.

Search skip frequencies are shared by service
search, direct entry search, chain search, and
Close Call modes. If skip frequencies are sent in
certain mode, the frequencies are also skipped
in other search modes and Close Call mode.

BC72 Paper OM.fm Page 45 Monday, October 25, 2004 3:11 PM

Advertising