Uniden 880 - Manual (Page 12)

12
Scan Channels in Memory
1. From All Channel Scan mode (see page 10), press MEM/SCAN until
MEM SCAN displays; the radio scans memory channels only.
2. Press MEM/SCAN again to return to MEMORY mode or the last
channel scanned.
Listen to Channels in Memory
1. Press MEM/SCAN until MEM displays.
2. Turn the Channel Selector knob and only saved channels will be
heard.
Clear Channels from Memory
1. In MEM mode, select a channel.
2. Press and hold MEM/SCAN until CLEAR displays.
3. Release MEM/SCAN. The radio plays the next channel in memory.
menUs
Access menus by pressing MENU/OK. The first menu, COLOR, displays.
Turn the Channel Selector knob to cycle through the other menus:
ƒ COLOR - Backlight color
ƒ CONT - LCD Contrast
ƒ BRIGHT - Brightness
ƒ WXSCAN - Weather Scan mode
ƒ DIAG - Diagnostics
– Battery Check
– Antenna Mismatch Check
– RF Power Check
ƒ Exit
Select Backlight Color
1. Press MENU/OK to activate the menus. Turn Channel Selector
until COLOR displays.
2. Press MENU/OK. Turn Channel Selector until DAY displays.
3. Press MENU/OK. DAY blinks.
4. Turn Channel Selector to cycle through the available backlight
colors or OFF. The selection number for that color displays in that