Using the master power key – Universal Electronics Cox Universal Remote Control User Manual

Page 15

Advertising
background image

USING THE MASTER POWER KEY

The Cox Universal Remote Control is equipped with a
unique feature that allows you to sequentially turn on or
off all of your home entertainment devices with a single
key press as follows:

1.

Point the remote control at the devices.

2.

Press and hold MASTER POWER for 3 seconds
to sequentially turn on or off all home enter-
tainment devices.

Depending on what mode is currently select-
ed, the remote control will send IR com-
mands to the devices in the following order:

For example, if TV is selected, pressing and
holding MASTER POWER for 3 seconds will
turn off the VCR, an auxiliary device, and the
cable converter.

NOTE: The remote control always defaults to
the CABLE mode after all devices are turned off.
Therefore, the initial power-on sequence will
always be TV, VCR, and an auxiliary device, if no
other device key is pressed first.

15

Start Mode

Device On/Off

End Mode

AUX

Cable, TV, VCR

CABLE

VCR

Auxiliary, Cable, TV

CABLE

TV

VCR, Auxiliary, Cable

CABLE

CABLE

TV, VCR, Auxiliary

CABLE

Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 15

Advertising