Uniden FP098 - Manual (Page 7)

Eight speed dial numbers can be programmed into the memory of your
telephone ( - ). Each memory location can store a maximum of 16
digits.
Storing One-Touch Speed Dial Numbers
1. Pick up the handset.
2. Press .
3. Enter phone number using the keypad (up to 16 digits).
4. Press .
5. Press the speed dial location you wish to store the number to
- .
6. Hang up the handset.
Dialing Speed Dial Numbers
To dial a stored memory number:
1. Pick up the handset.
2. Press the desired speed dial button, - .
Chain Dialing
On certain occasions (such as telephone banking), after dialing one number,
you may wish to dial another number without hanging up. This is known as
chain dialing or cascade dialing.
Simply store the second number in another speed dial location. During your
call, press the first speed dial button. Then at the relevant time press the next
speed dial button.
SPEED DIAL NUMBERS
6 6
M1 M8
M1 M8
M1 M8
store
store
If back up
batteries are
either flat or
not fitted,
speed dial
numbers will
last one hour
after the FP098
is unplugged
from the
telephone jack.