Inverting the travel kit – Uniden BTSC1500 User Manual
Page 7
Connecting to your phone
Most phones connect to the travel kit as soon as you pair it; if yours won’t, turn the
travel kit off and back on. If the travel kit still won’t connect, check your phone’s owner’s
manual for additional information.
Once the travel kit is paired:
Each time you turn the travel kit on, it automatically connects to whatever device it
was connected to last.
If the travel kit loses the connection (e.g., if your phone is out of range), it should
reconnect automatically when it detects the phone again. To manually reconnect,
press
Multi-function.
If the travel kit is inactive for 10 minutes, the display turns off. It turns back on if it
detects activity or a button press. If there is more than 1 hour without a Bluetooth
connection, it will automatically turn itself off.
Inverting the Travel Kit
The travel kit can operate upside down so you can clip it to either side of your visor.
To reverse the visor clip: press in on the two tabs that come through the holes in the clip,
and slide the clip out. Rotate the clip 180 degrees and slide it back in.