CREATIVE ZiiO 10" - Manual (Page 3)

Back to top
Charging
Before you turn on your device for the first time, charge it from a wall socket with the use of
the included power adapter. Initial charging may take up to 6 hours. The LED is turned on
while your device is charging. The LED turns off when the battery is full.
Note:
It is normal for your ZiiO tablet to become warm while charging.
Assembling the Power Adapter
If there are several plug heads available, select one that matches your wall socket. Mount
the plug head onto the power adapter base until it locks in place. Note that the plug head
must be inserted approximately at the same angle as shown in the figure below. After
locking, make sure that it is firmly secured.
If you need to remove the plug head from the power adapter base, pull the latch to release
the plug head, and gently remove it from the base.
3
Important:
If your device is on and you want to eject the SD card, press
, tap Settings >
SD card & local storage > Unmount external SD card.
4
HDMI Port
Connects to a HDMI-supported TV or monitor.
5
USB Port
Connects your device to a computer.
6
LED
Turns on when charging.
Turns off when fully charged.
7 Power Adapter Jack
Connects to a power outlet for charging.
8 Camera
9
Volume
Press + or – to adjust the volume.
10
Function and Media Buttons
See
Function and Media Buttons .
11 Stereo Speakers
Page 3 of 15