Uniden ENR1504 - Manual (Page 44)

87
21 and Advanced Router Configuration on page 38 for
details on configuring the router to connect to your ISP.
7. If the configuration seems correct, contact your ISP to verify
the settings needed to connect to their network.
8. If the configuration settings you have match those of your
ISP, there may be an incorrect configuration setting on some
other screen. Reset your router to factory defaults, and
start the configuration again.
9. If you are using PPPoE or Dynamic IP to connect to your ISP,
you can check the status of the connection from the Basic
Configuration, WAN, PPPoE or the Basic Configuration,
WAN, Dynamic IP (DHCP) screen. Click the Status
button at the bottom of these screens to check the status of
the connection.
10. If you still cannot connect to you ISP, contact customer
support for your ISP.
88
Specifications
Model No ENR1504
Standards IEEE 802.3i, IEEE 802.3U, IEEE
802.3x
Network and
Routing
Protocols Static and Dynamic Routing with
TCP/IP, DHCP, PPPoE, DNS, NAT,
TFTP, HTTP, IPSec, L2TP, PPTP
WAN Port 1 RJ-45 connector
LAN Ports 4 RJ-45 UTP connectors
LED Indicators 1 Power
1 Test
1 WAN (Link/Activity/Speed)
4 LAN (Link/Activity/Speed)
Power External 7.5V DC
Operating
Temperature 32 o - 104 o F (0 o – 40 o C)
Storage
Temperature -4 o – 158 o F (-20 o – 70 o C)