Uniden BC9000XLT - Manual (Page 13)

If an error is made during
programming, or if the frequency is out
of range, this screen appears. Enter a
valid channel or frequency number.
If the frequency is stored in another
channel, the display will indicate the
original channel for that frequency.
To program more channels, repeat steps 3 and 4.
Press
e
to store the same frequency into the selected channel.
Or, select another channel.
Or, press
? twice to clear.
Programming With the Rotary Tuner
Use these controls:
1. Press m to enter the
Manual Mode.
OR
Press LOCK, then turn the
Rotary Tuner.
Note: Make sure the LOCK LED is out.
2. Press CHAN, then turn the knob.
Example: Channel 52
Turn right to step up through
channels, left to step down
through channels.
Note: The channel selection flashes on the display, indicating that the
frequency displayed is not programmed in that channel.
13
Bank A P ch 1
OUT OF BAND
Bank A ch 1
DUPLICATE CH 230
COUNT AUX STATUS
SCAN
SRC
MANUAL
AUTO
PROG SEND ALPHA
HOLD
LIMIT
MEM SHIFT
LINE EXT SP
PRI TURBO CTCSS DATA
BRI DIM OFF
AM NFM WFM
5KHz 12.5 KHz 25KHz
CLR 50KHz HI-CUT
L/O DELAY ATT
1 2
4
7
5
8
0
3
6
9
E
A
F
B
G
C
H
D
I
E
J
FREQ CHAN
LOCK
SQUELCH
VOLUME
OFF
BC XLT 9000
TWIN TURBO
SCAN MANUAL
BRI DIM OFF
AM NFM WFM
5KHz 12.5 KHz 25KHz
CLR 50KHz HI-CUT
1 2
4
7
5
8
0
3
6
9
E
FREQ CHAN
LOCK
Scan, Numeric Keys, and Rotary Tuning Controls
Bank B ch 49
L/O 000.0000MHz
Bank C ch 52
L/O 000.0000MHz