Universal Electronics Charter S4000 - Manual (Page 19)

www.urcsupport.com
19
Clearing the ON DEMAND Macro Key
3. Press and release the ON DEMAND key once.
The ON DEMAND key is now clear and ready for
reprogramming (see “Programming the ON DEMAND
Macro Key” on page 18). If desired, repeat these to clear
another Tune-In key.
USING THE SYSTEM ON/OFF KEY
The C4000 and S4000 Remote Controls has a unique
feature that allows you to sequentially turn up to four of
your home entertainment devices on or off with a single
key press.
NOTE:
SYSTEM ON/OFF is not programmable. It
turns your devices on or off in a pre-pro-
grammed sequence. The pre-programmed
sequence is: CBL (or STB) Power, TV Power,
DVD Power, and AUX Power. See “Program-
ming Device Control” on page 10.
Using the SYSTEM ON/OFF Key
NOTE: Only devices you have programmed the
remote to control turn on or off sequentially.
For example, if you have programmed control
of your TV, but not your DVD player, SYSTEM
ON/OFF does not turn your DVD player on or
off.
1. On the remote control, press CBL (or STB)
once; it blinks once. Then press and hold SET
UP until the CBL (or STB) key blinks twice.
2. Enter 9 9 5. The CBL (or STB) key blinks
twice.
4. Press and hold SET UP. The CBL (or STB) key
blinks twice.
1. Press SYSTEM ON/OFF once. Your devices turn
on or off in the pre-programmed sequence.
Generic Pioneer Charter OCAP.fm Page 19 Friday, July 20, 2007 1:28 PM