Working environment – Toshiba Pocket PC e310 User Manual

Page 9

Advertising
background image

Introduction

User's Manual

ix

TOSHIBA Pocket PC e310

Version

1

Last Saved on 15/03/2002 14:34

ENGLISH using Euro_C.dot Printed on 15/03/2002 as PDA2_UK

When using the optional (sold separately) “SD memory card”, please
be sure to read the relevant instruction manual and ensure that you
are aware of correct handling procedures.

Do not allow the card to be subjected to any severe shock while
connected to the unit. Such shocks can cause damage or failure.

Do not carry the unit with the card still connected.

Carrying the unit with the card connected can cause loss of the card
due to it falling from the unit.

A lithium ion battery is used as the built-in battery.
Please request the dealer from whom the Pocket PC was purchased
to replace the built-in battery when this becomes necessary.
Lithium ion batteries are recyclable. When you replace your built-in
battery, please request that the repair center recycle the battery.
Never dispose of the battery with ordinary waste.

The battery is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. Dispose of the battery as required
by local ordinances or regulations. Use only batteries recommended by
Toshiba as replacements.

Working environment

This product was designed to fulfill the EMC (electromagnetic
compatibility) requirements for “residential, commercial and light industry
environments”.
Toshiba does not approve the use of this product in working
environments other than “residential, commercial and light industry
environments”.
For example, the following environments are not approved:

Industrial Environments (environments with a mainvoltage >230V~)

Medical Environments

Automotive Environments

Aircraft Environments

Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of Toshiba
Corporation. The consequences of the use of this product in non-
approved working environments may be:

Interference with other devices or machines in the nearby surrounding
area

Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the nearby surrounding
area

Advertising