Uniden CEZAI998 - Manual (Page 18)

[17] INSTALLING THE PHONE w w w . u n i d e n . c o m
Connecting the Cordless Handset and Charger
The cordless handset is powered by a rechargeable battery pack. The battery recharges automatically
when the handset is placed in the charger.
1) Connect the AC adapter to the DC IN 9V jack and to a
standard 120V AC wall outlet.
CAUTION: Use only the Uniden AD-310 AC adapter.
2) Set the charger on a desk or tabletop, and place the
handset in the charger with the keypad facing forward.
3) Make sure that the charge light illuminates. If the
charge light does not illuminate, check to see that the
AC adapter is plugged in and the handset makes good
contact with the charging contacts.
4) Charge the handset battery pack for at least 15-20 hours before using your new cordless handset for
the first time.
5) To test your connection, try making a call from the cordless handset. If your call does not connect,
check to make sure the battery is fully charged. If you see LOW BATTERY on the cordless handset
display, check to make sure the battery is properly connected. To check the battery, slide the battery
compartment door open and check the battery cables to ensure a tight and proper connection. If your
handset still does not work, please contact Uniden’s Customer Service department. Please see back
cover for contact information.
INST
ALLING THE PHONE