Uniden UBC73XLT - Manual (Page 37)

37
Special Features
7. Press E while C-C.PS appears. One of the
following Pager Screen options appears.
PS On: The scanner ignores hits on common
pager frequencies.
PS OFF: The scanner alerts you when it receives
hits on common pager frequencies.
8. Repeatedly press or until the option you
want appears, then press E to select it.
9. When you select the option, press Scan to start
Close Call search. Otherwise, to continue normal
scanning, repeatedly press Func until disappears
then press Scan.
Using Close Call RF Capture
To turn on the Close Call feature, press Func +
once except in band select or program mode.
appears. Every 2 seconds, the scanner checks
for frequencies in the range you specified in “Setting
the Close Call Options” on Page 35 and interrupts the
audio when it checks for a Close Call transmission in
that range.
Notes:
• Set the squelch tight (where only strong signals
are received) while using Close Call.
• To continue scanning normally while the Close
Call feature is working, simply press Scan twice.
When the scanner finds a frequency, it sounds the
alert you specified in “Setting the Close Call Options”
on Page 35, and Found flashes. Press any key to
confirm the displayed frequency. Press Scan to
resume scanning. Or press or while the
frequency and appear to select the band where
you are searching.
F
F
UBC73XLT Paper OM.fm Page 37 Monday, May 14, 2007 9:13 AM
UBC73XLT OM.indd 37 23/9/11 1:50:30 PM