Surgesteam ironing – SINBO SSI 2853 User Manual

Page 12

Advertising
background image

- 11 -

SURGESTEAM IRONING

The surge-of-steam feature provides powerful steam for removing stubborn wrinkles.
• Fill the iron with water as described in “How to fill with water”.
• Plug iron into electrical outlet.
• As indicated on the temperature control knob, steam ironing is only possible at higher
temperature setting indicated with ‘MAX’ mark, otherwise the water will leak from the
soleplate.
• Turn the temperature control knob to the position according to the fabric being ironed
as described in point 4 of ‘Setting the temperature’
• The indicator light will turn ‘OFF’ when the indicated setting reaches the correct
temperature.
• Press the Steam jet button to release the surge-of-steam. Pressing the button several
times may be necessary to prime the surge system..
• Wait a few seconds for the steam to penetrate the fabric before pressing the button
again for more steam.
• NOTE: For optimum steam quality, do not apply more than four successive ‘SHOT’ after
the indicator light goes off.

CLEAN & MAINTENANCE
• Please unplug the iron and allow to cool the heating plate when carry out the maintenance.
• Warning: To protect against electric shock, do not immerse cord, plug, or appliance
in water or any other liquid.

ANTI-DRIP:
• This iron is equipped with a drip stop function: the iron automatically stops steaming
when the temperature is too low to prevent water from dripping out of the soleplate.

SELF CLEAN
• The function of self clean is to clean the soleplate when you use this iron about half
of year.
You must be:
1.
Fill the iron and plug in;
2. When the temperature attaches “MAX”, press the self clean-Button for about 1 minute;
3. Plug into power in order to dry the water in soleplate off
4. Conduct self cleaning only with a basin to collect all water. Otherwise the hot water
will be spilled maybe over the user.

ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment!
Please remember to respect the local regulations: hand in the non-working
electrical equipments to an appropriate waste disposal center.

Advertising