Uniden UH088SX - Manual (Page 27)

GETTING STARTED
Uniden does not represent this product to be waterproof. Do not
expose this product to Rain or Moisture.
If you don't use the uh064sx for long periods, Uniden
recommend removing the batteries. The uh064sx is designed
to retain the previous user settings. This feature will continue to
use a small amount of battery power while the unit is
switched off.
Do not charge alkaline or non rechargeable batteries.
BATTERY INSTALLATION
Your uh064sx unit uses the included NiMH battery pack for power. The unit
can be powered with optional 4 AAA ALKALINE batteries.
1. Make sure your radio is off.
2. Release the battery cover clip, then remove the
battery cover.
3. Insert NiMH battery pack according to the
orientation on the battery pack.
Insert 4 AAA ALKALINE batteries (not included)
according to the polarity symbols inside the battery
compartment.
4. Align the battery cover tabs with the uh064sx tab
holes then replace the cover clip.
To avoid damage to the unit do not mix old and new batteries.
To install the batteries:
OR
(2)