Unibrain iZak - Manual (Page 25)

iZak™ User Guide
Remote Control Battery Installation
iZak™’s Remote Control uses one (1) 3Volts CR2025 type Lithium Battery. This battery is
packaged separately from the remote control. To load it into the remote, do the following:
• Remove the battery compartment
cover/holder.
• Load the battery onto the battery
cover/holder.
• Position the “+” side of the battery up
side according to the “+” symbol of the
battery holder.
• Slide the battery compartment
cover/holder into the remote.
NOTE: Remove the battery if the remote control will not be used for a long time.
25