Uniden TRU 8885 - Manual (Page 65)

[ 6 4 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E w w w . u n i d e n . c o m
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
Remote access with the handset
You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press the
soft key on the handset. Remote
Answ eri ngM ach ine op era tio n appears on the handset display. The answering
system announces the current time and the number of messages stored in the
memory. Messages will be played in the order in which they were received. The
time and day that each message was received is announced after the message is
played.
2) You hear "To play incoming messages, press two. For help, press zero."
You will hear a beep.
• If you press end before the answering system answers, the phone will return to standby.
• When the answering system does not answer within 6 seconds, you hear a beep and the
phone will return to standby.
• When you receive a call, the remote operation is canceled.
• You can change the handset volume during a remote operation.
• During the remote operation
A nsw erin gMa chi ne ope rat ion appears on the base.
• If you have new messages and old messages, after you have reviewed your new
messages, you can play your old messages by pressing 2 again.
3) Enter a command within 30 seconds. Select a command from the following chart:
•Time stamp will not be
heard until you have
set the time.
•When the answering
system is full,
appears on the base.
You should delete
some messages so that
the system can record
new messages. (Refer
to "Deleting a
message" on page 59.)
note
(7..
TH
E IN
TE
G
R
A
T
ED
AN
S
W
E
R
I
N
G DE
VI
CE
TRU8885_1st.book 64 ページ ２００４年１月７日 水曜日 午後６時３９分