Uniden Handheld UHF Transceiver UH076SX - Manual (Page 19)

17
VOX feature will not work without the Vox Headset Microphone.
The built in mic of UH076SX is temporarily disabled, however
accidental pressing of will cause the unit to transmit briefly.
Changing the VOX sensitivity setting to oF without removing the
microphone will cause the unit to transmit continuously.
To activate VOX
1. Press and hold for 1.5 secs. VOX icon blinks.
2. Press either or within 10 secs to select the desired
VOX sensitivity level (9 with the lowest sensitivity to 1 with the
highest sensitivity).
3. Press to save the selected level. VOX icon stops blinking.
4. Install VOX Headset (not supplied) to UH076SX.
To De-activate VOX
1. Remove VOX Headset from UH076SX.
2. Press and hold for 1.5 secs. until VOX blinks.
3. Press repeatedly and until oF is displayed.
4. Press to save the setting. VOX icon disappears.
PTT
vox
vox
vox
vox