Uniden LRD 766 - Manual (Page 11)

ADJUSTING THE WINDSHIELD MOUNTING CLIP
1) The metal portion of the bracket locks into the plastic
portion at two different positions. These positions can be used
for vehicles with two different vertical angles of their
windshields. The back position can be used for vehicles with
windshields that are slanted back.
2) For optimum laser detection, gently bend the angled portion
of the windshield mounting bracket so that the LRD 767/
LRD 777 is parallel to the road surface. Be sure the
LRD 767/LRD 777 is mounted so it is free of obstructions
from seat backs, rear view mirror, sun visors, or the ceiling
of the automobile. There must be a clear 360 line of sight
to the outside of the vehicle.
To mount the LRD 767/LRD 777:
1) Press the button on top of the radar and insert the
windshield clip into the LRD 767/LRD 777. The metal
portion of the bracket locks in to the plastic portion.
2) Place the bracket and the LRD 767/LRD 777 in the proper
location on the windshield of your vehicle, and press the
suction cups firmly against the windshield.
10